
I am happy to report that we were able to get out and work
on the bus today. We did a bit of poking
around behind the metal on the walls to see if there was any major water
damage, and found that everything looked to be in good shape. We stood around a bit and hemmed and hawed
about whether or not we should take up the metal paneling. On the on one hand
it would be easier and faster to just insulate and wall over the existing
paneling, which would allow us to get on the road and start enjoying our bus
earlier. On the other hand, if water leakage is a problem in the future, we’ll
have invested a lot more time, effort and money when we have to take everything
that we’ve built out because we didn’t do it right the first time. In the end we decided to do it right and we
began to remove the screws for the paneling.
We have also been kicking around the idea of doing a partial raise of our roof.
Many of the buses that we have fallen in
love with on housetrucks.org have lovely lofted areas, which really makes the
dwellings look more like homes and less like RVs (which is the look we’re going for :) Again, the negatives of this endeavor are the
time and expense it would take, not to mention the extra thought it’s going to
take to engineer it. The positives are
creating a unique and lovely living-space, and a having a little bit extra
space so that we don’t have to sweat our layout. Plus it seems a lot more
romantic and idealistic. We went back and forth with the same old
arguments that we’ve been using for weeks, before we decided that we both
really want it. Rationality and common
sense be damned! We removed the back two
panels of ceiling in order to sort of seal the decision.
We had a lot of fun today.
We both had a great time singing and being silly. Using power tools was good, too.
We’re still working on layout, and trying to figure out exactly what appliances
we want to put in the bus. Right now we’re
trying to decide on which toilet and woodstove we’d like. we’ve been looking at a Sun-Mar composting toilet http://www.sun-mar.com/index.html,
in the Excel model. I’ve done a lot of research, and although it’s
expensive, it seems to be the most eco-friendly and responsible way of dealing
with our waste. It’ll allow us to not
have a black-water tank, which would allow us independence from blackwater
sucking stations, as well as alleviate the worry of having to winterize a tank
full of poo. It also beats the
suggestion to just use a bucket and dump it in a trash can. I guess I’m willing to fork over some cash in
order that someone else is not responsible for my waste.
I think we may have also narrowed down our choice of wood stove. We really like the Swedish brand Jotul. We’ve been looking at their smaller stoves,
but secretly we both really like the idea of having a viewing screen. A closed iron black box just isn’t as
romantic. So again I think we'll throw caution to the wind, and buy a bigger stove. Although it may be more BTUs than we need, I think it's really what we want. Besides, we'll essentially be living in a tin can with windows, so we can probably use all the heat we can get :) This is the model that we're lookng at: http://www.jotul.com/en-us/wwwjotulus/Main-menu/Products/Wood/Wood-stoves/Jotul-F-3-CB/
Our philosophy seems to be that even though some of the things we’re putting in
our bus may cost us some money up front, we’ll be able to take almost
everything with us in a few years when we settle down and buy a house. It makes
sense financially and environmentally to buy a quality item now, rather than
buy one sub-quality item now and then be forced to chuck it in the land fill
and replace it in the near future.
I’m also researching the best way to refurbish our claw-foot
tub. The one that we bought is in fairly good condition, but it does have a
spot where the porcelain has rubbed off, right where one’s bottom goes. Any suggestions?
As always, we’d love for anyone reading this to
comment or make suggestions! Thanks!
Comments
redo a bath tub
Hi! My dad redid our bathtub. Mom has had a few different things redone, and Dad figured he could do it himself and save $$$. He searched online and bought a kit especially for redoing old tubs and pedestal sinks. Then he got wild and ordered the red kit instead of just the plain white and the other option was black. He did the inside white, legs white, and rest of the outside red. It looks nice. That was done when I was in highschool. Now, we do have some of the "paint," or whatever, coming up off the very bottom. Not sure why, but could be due to him being a farmer and having a dirty butt, haha. So, I'm sure he could tell you guys how difficult it was or what he learned.
Love,
Ash
You kids had better...
stick a magnet on that bus and make sure it's steel shelled and not aluminum BEFORE you make any plans.If it's aluminum,it will need to be taken somewhere and TIG welded or MIGed with a spool gun.And that will be a lot of money.And that idea you told me about before definately won't be possible,as you cannot weld steel vans to aluminum school buses.If it's steel then I can definately help out.Hell you can drive it over to the house if need be.I seen that bus out behind the barn but was wondering when you guys were going to start on it.
Composting Toilet
Hi Joni,
Google alerted me about your blog regarding a bus and composting toilets. I would suggest to you to give Jim Weaver a call at 1-800-524-6538 and ask him about the advantages of the Swedish made BioLet XL. It is the best composting toilets out there, although a bit more $ than the more basic Sun-Mar (manual drum, footstep, large size, etc). Ask Jim for any discounted units... I know he sometimes has some available.
Good Luck with your great project!
Peter Andersson
"A Swede who has been involved with composting toilets, in particular BioLet for over 30 years now..."